Hotline: +49 271 401 4123

BACKWASH DRUM FILTER (RTF)

Tried-and-tested technology in a new design

The Backwash Drum Filter is based on the filtration and backwash principle of the Filterautomat. A customized selection of materials is possible for the most difficult media.

Its special design enables a filter fineness of 5 micrometers.

item.alt

Technical data

Flow rate

max. m³/h

Filter fineness

> µm

Operating pressure

1.5 to bar

Flanges

DN 100 to

Automatic cleaning

Yes

Filter housing

Steel, stainless steel, GRP

Advantages

  • High cleaning speed (4-10 m/s)
  • 100% cleaning of the entire filter area
  • Low flushing water losses
  • Robust design
  • Shredding of coarse particles
  • Fine filtration ≥ 5 μm possible
  • Fitted with wedge-wire screens, wire mesh
  • Completely wired and tested unit

High productivity

The raw water enters the filter via the inlet flange and flows through the filter drum from the inside to the outside. The solids in the raw water are retained in the segment-like openings on the inner part of the filter drum located on the inside of the filter element. The purified water leaves the filter through the clean water outlet.

    item.alt

    Backwashing

    A differential pressure measurement in the raw water inlet and the clean water outlet determines the degree of contamination of the filter element. At a defined differential pressure, the backwash process is activated.

    An adjustable time relay in the electrical control system additionally enables the backwash process. At the start of filter cleaning, the motor-driven backwash valve opens, generating atmospheric pressure in the backwash line and the hollow shaft in the filter. Due to the excess pressure outside of the filter drum on the clean water side, the solids retained on the inside of the filter element are now forcibly backwashed into the atmosphere against the direction of filtration. The rotation of the filter drum and the flushing shoes attached to it guarantees the 100% cleaning of the filter basket. The flushing process is complete after 15-20 seconds and the backwash valve is closed automatically. Filtration is not interrupted during backwashing.

    item.alt

    Drum roll

    The filter drum consists of a sturdy inner and outer support basket. The filter element is located between these support baskets. The conical design allows the three individual parts to be fixed and screwed together with perfect dimensional accuracy. The segment-like openings of the outer part of the filter drum can also retain coarser particles. These are then flushed out of the system during the backwash process.

    EXPECT MORE

    HOW TO GET RID OF MUSSELS

    Mussels and mussel larvae are fast becoming a major threat to industry. Once mussels or their larvae are in your system, they can multiply unhindered and incapacitate entire pipeline networks. The unique MUSSEL STOP system from DANGO & DIENENTHAL offers reliable protection for your plant components against unwanted mussel infestation, thereby minimizing breakdowns and maintenance costs.

    Mussel Stop

    GET MORE

    Downloads

    Backwash Drum Filter (RTF).docx

    0,02 MB

    Backwash Drum Filter (RTF).pdf

    0,92 MB

    MORE PURITY.pdf

    1,59 MB

    SHAPE BETTER VALUES

    CLOSER. BETTER. SIMPLER.

    We will make sure that you get the filter that is perfectly tailored to your application. Our engineering office will design the filter to match your operating parameters. Our product is thus tailored specifically to your application.

    image/svg+xml

    Experienced partner

    All DANGO & DIENENTHAL filters are handled by our specially qualified and regularly trained staff. Both our mechanical production and assembly departments have extensive expertise.

    image/svg+xml

    Certified testing

    Our certified quality management system enables seamless monitoring and control of all production steps. This ensures early detection and troubleshooting, allowing us to offer you a high level of quality.

    image/svg+xml

    The team at your side

    If you require staff for training or maintenance at your company, don’t hesitate to contact us. Our specially qualified employees will be happy to assist you.

    image/svg+xml

    Ideal production conditions

    We have been producing filters in our factory in Siegen, Germany, since 1941. Our continuously improved, state-of-the-art range of machinery and modern factory buildings provide an environment that is essential for manufacturing high-quality products.